Recover data from usb stick​

Whether it’s your university thesis, cherished photos, confidential work documents, or an entire portable application setup, a corrupted or accidentally formatted USB drive can seem like a disaster. Thankfully, USB data recovery is not only possible in many cases it’s also relatively straightforward with the right approach.

1. Accidental Deletion

The most common cause. A simple mistake like selecting and deleting the wrong files can render data inaccessible, especially if the USB doesn’t have a Recycle Bin feature like a computer.

2. Formatting

You may accidentally format the USB drive while intending to format a different device. Even quick formatting wipes out the file table, making data appear lost.

3. Corruption

Corruption can occur from improper ejection, virus infections, interrupted data transfers, or physical damage. Symptoms include prompts to format the drive or messages like “Drive not accessible.”

4. File System Errors

File system issues such as RAW file systems or missing partitions can prevent access. Your USB stick might appear with zero bytes or may not show up in File Explorer.

5. Physical Damage

A bent USB connector or internal component failure can stop the USB from functioning altogether. Recovery in such cases is more complex and often requires professional help.

Preliminary Steps Before Recovery

If you suspect data loss on your USB stick, avoid using it immediately. Continued use can overwrite deleted files, reducing the chances of recovery.

1. Stop Using the Drive

The most important rule: don’t copy new files, reformat, or make changes until you’ve recovered the lost data.

2. Check with Another Computer

Sometimes, the issue may lie with the USB port or driver on a particular computer. Try accessing your USB stick on another device.

3. Use Disk Management

On Windows, open Disk Management (diskmgmt.msc) to see if your USB stick appears there. If the drive is listed but marked as RAW or Unallocated, it’s likely recoverable.

4. Run CHKDSK

For minor file system errors, use CHKDSK in Command Prompt:

bash

CopyEdit

chkdsk X: /f

Replace “X” with your USB’s drive letter. This won’t restore deleted files but might make an inaccessible drive usable again.

Methods to Recover Data from a USB Stick

Let’s explore the most effective methods of recovering data from a USB drive. You can choose based on your level of technical comfort, the extent of damage, and whether you prefer software or manual solutions.

Method 1: Use Data Recovery Software

Panda Assistant helps you retrieve lost data with just a few clicks. The software supports all major file types documents, videos, images, audio files, and more and works seamlessly with all popular USB brands and file systems (FAT32. exFAT, NTFS).

Using advanced scanning algorithms, Panda Assistant thoroughly analyzes your USB stick for recoverable files. You can preview results before restoring them, ensuring you recover exactly what you need. The deep scan mode digs even deeper to find data that may have been lost due to formatting or system errors.

To recover your files:

Launch Panda Assistant and connect your USB stick.

Choose the drive and let the scan begin.

Preview and select the files you want to recover.

Click “Recover” and save them to a secure location.

Method 2: Recover Using CMD (Command Prompt)

Windows has built-in command-line utilities that can sometimes bring files back, especially hidden or system files.

ATTRIB Command:

bash

CopyEdit

attrib -h -r -s /s /d X:\*.*

X: is your USB’s drive letter.

This command reveals hidden files and restores file attributes.

Steps:

Open Command Prompt as Administrator.

Type the command above, replacing the drive letter.

Press Enter and wait for the command to execute.

This method doesn’t work on deleted files but can recover files hidden by viruses or software errors.

Method 3: Use Windows File History or Backup

If you’ve enabled File History or other backup methods, you may be able to restore previous versions of files.

Steps:

Right-click on the folder where files were saved.

Choose Restore previous versions.

Browse available versions and restore the files you need.

Note: This only works if your USB files were backed up or mirrored on the PC.

Method 4: Try DiskPart for Recovery from RAW Partitions

If your USB stick shows as RAW (unrecognized file system), DiskPart can be used to clean and recreate the partition, after recovering data using software like PhotoRec.

Warning: This method deletes everything on the drive.

Use recovery software to extract data from the RAW USB.

Open Command Prompt and run:

pgsql

CopyEdit

diskpart list disk select disk # clean create partition primary format fs=fat32 quick assign exit

Replace # with your USB stick’s disk number.

Method 5: Professional Data Recovery Services

If your USB stick is physically damaged—bent connector, no power, or not recognized at all—your best bet is to consult a data recovery specialist. These services often operate in cleanrooms and can retrieve data from damaged NAND chips.

What to Expect:

Diagnostic Fee (sometimes waived)

Turnaround Time (1-10 days typically)

Cost varies widely ($100–$1000+ depending on damage)

Use professional help only when data is critical and all other methods fail.

Special Cases and Advanced Tips

1. Formatted USB Drive Recovery

If you accidentally formatted your USB stick, stop using it immediately. Most recovery software has a “recover from formatted drive” feature.

2. USB Not Recognized

Try the following steps:

Plug into a different port or computer

Update or reinstall USB drivers

Use Disk Management to see if the drive appears

Assign a drive letter manually

3. Recovering Specific File Types

Tools like Recuva allow you to filter by file type: documents, photos, videos, etc. This speeds up recovery and improves accuracy.

Avoiding Future Data Loss: Best Practices

Once you’ve recovered your data, the next step is prevention. Implementing a few proactive measures can save you from future frustration.

1. Always Eject Properly

Use the “Safely Remove Hardware” option to prevent data corruption during ejection.

2. Use Reliable USB Sticks

Stick to reputable brands like SanDisk, Kingston, or Samsung. Cheap drives are more prone to failure.

3. Back Up Important Files

Keep duplicates on cloud storage or an external hard drive. Redundancy is the best insurance.

4. Scan for Malware

Keep antivirus software active and regularly scan USB drives.

5. Avoid Editing Files Directly

Copy files to your computer before editing. This reduces the risk of corruption.

When to Stop DIY and Seek Help

Trying too many recovery attempts can worsen the problem. Here’s when to stop and call in the experts:

The drive is making clicking or grinding noises.

The USB doesn’t show up in Disk Management at all.

The USB connector is physically broken.

Recovery software fails to detect the drive repeatedly.

Recovered files are all corrupted or unreadable.

Frequently Asked Questions

Can I recover data from a physically broken USB stick?

Yes, but it often requires chip-off recovery or specialized hardware. Contact a data recovery lab.

Are free recovery tools as good as paid ones?

Free tools can be effective for basic recovery. Paid versions offer deeper scanning, better support, and advanced features.

Will formatting a USB stick erase everything?

Yes. Even a quick format resets the file system, though data can often be recovered unless overwritten.

Can data be recovered from an encrypted USB stick?

Only if you have the decryption key or password. Encrypted drives are nearly impossible to recover without authorization.

How long does USB data recovery take?

It can take minutes for simple recovery, hours for deep scans, or days for professional service depending on damage.

Losing data from a USB stick can be stressful, but it’s far from the end of the road. With modern data recovery software, built-in operating system tools, and professional services, chances are high that you can retrieve your lost files especially if you act quickly and carefully.

Start with safe methods: try different ports, use trusted recovery software, and always avoid writing new data to the drive. If those don’t work, weigh your options with command-line fixes or expert help. Just as importantly, learn from the experience and adopt better storage and backup habits moving forward.

About us and this blog

Panda Assistant is built on the latest data recovery algorithms, ensuring that no file is too damaged, too lost, or too corrupted to be recovered.

Request a free quote

We believe that data recovery shouldn’t be a daunting task. That’s why we’ve designed Panda Assistant to be as easy to use as it is powerful. With a few clicks, you can initiate a scan, preview recoverable files, and restore your data all within a matter of minutes.

Subscribe to our newsletter!

More from our blog

See all posts